High lead ground ball screws integrate large lead geometries with precision thread grinding to enable rapid linear movement up to 2.0 meters per second. Built from heat-treated alloy steels with raceway hardness of HRC 58 to 62, these units deliver positioning accuracy up to JIS C3 grade and maintain stiffness under continuous motion cycles.
Key Features
High Travel Speed: Large lead-to-diameter ratios allow rapid displacement without increasing motor rotational speed.
Certified Pitch Precision: Ground thread raceways maintain cumulative lead error within 0.008 mm per 300 mm.
Smooth Internal Return: Curved circulation caps direct bearing balls around large lead angles to reduce operation noise.
Backlash Elimination: Preset loading from 1% to 7% of dynamic capacity prevents axial play and improves positional repeatability.
Multi-Point Contact Profile: Gothic arch groove design distributes contact stress evenly during rapid motion reversals.
Technical Specifications
|
Parameter |
Specification |
|
Diameter Range |
12 mm – 50 mm |
|
Lead Range |
10 mm – 50 mm |
|
Accuracy Classes |
JIS C3, C5, C7 |
|
Raceway Hardness |
HRC 58 – 62 |
|
Shaft Material |
50CrMo4 / CF53 |
|
Nut Material |
20CrMnTi |
|
Ball Material |
GCr15 Chrome Steel |
|
Maximum DN Value |
120,000 |
Product Configuration
High lead ground ball screw assemblies contain five primary elements:
Precision Shaft: Induction-hardened steel core with precision-ground thread raceways and centerless-ground bearing seats.
Recirculation Nut: Steel housing with optimized ball channels designed for severe reversal forces.
Deflector Caps: Engineered return components that maintain ball stream continuity along steep lead angles.
Matched Steel Balls: Grade 10 bearing balls calibrated to 0.0005 mm diameter tolerance for uniform force sharing.
Contact Wipers: Dual-lip NBR seals fitted on both nut faces to seal in grease and block dust ingress.
Accuracy & Lead
|
Accuracy Class |
Cumulative Lead Error |
Mean Travel Deviation |
Surface Roughness |
|
JIS C3 |
+/- 0.008 mm / 300 mm |
0.012 mm |
Ra 0.2 microns |
|
JIS C5 |
+/- 0.018 mm / 300 mm |
0.020 mm |
Ra 0.4 microns |
|
JIS C7 |
+/- 0.050 mm / 300 mm |
0.050 mm |
Ra 0.8 microns |
Preload Options
|
Preload Type |
Force Level |
Axial Play |
Primary Usage Condition |
|
Clearance |
Zero Force |
0.005 mm |
Low friction manual adjustment |
|
Light Preload |
1% - 3% Dynamic Capacity |
Zero |
General automated linear motion |
|
Medium Preload |
5% - 7% Dynamic Capacity |
Zero |
High dynamic rigidity under load |
Dimensions & Selection
|
Model |
Shaft Diameter (mm) |
Lead (mm) |
Nut Outer Diameter (mm) |
Dynamic Load (kN) |
Static Load (kN) |
|
FSC 1616 |
16 |
16 |
32 |
7.8 |
17.5 |
|
FSC 2020 |
20 |
20 |
38 |
9.2 |
22.8 |
|
FSC 2525 |
25 |
25 |
47 |
14.6 |
36.2 |
|
FSC 3232 |
32 |
32 |
58 |
21.4 |
56.0 |
|
FSC 4040 |
40 |
40 |
73 |
34.8 |
91.5 |
Manufacturing Process
Material Inspection: Spectrographic chemical testing and ultrasonic flaw detection on incoming steel bars.
Stress Relieving: Thermal normalization to stabilize dimensions prior to precision machining.
Rough Machining: CNC turning of journal steps and preliminary thread profile cutting.
Case Hardening: Deep induction hardening across thread raceway surfaces.
CNC Thread Grinding: Multi-pass grinding to establish lead geometry and surface profile smoothness.
Concentric Journal Grinding: Precision grinding of bearing journals to runout limits below 0.005 mm.
Nut Matching: Assembly and load adjustment using calibrated torque gauges.
Metrology Verification: Pitch verification using laser interferometers and 3D coordinate measuring machines.
Applications of High Lead Ground Ball Screws
Pick and Place Systems: Enables high linear acceleration across multi-axis automated gantries.
Laser Cutting Frames: Drives high-speed motion axes requiring constant velocity and precise contour control.
Additive Manufacturing Systems: Maintains vertical layer control during rapid traverse moves.
Routing Equipment: Serves as a direct drive alternative to belt systems in medium stroke applications.
Sorting Systems: Converts rotational torque into rapid horizontal displacement in high-throughput facilities.
Verification & Quality Controls
Every ground screw thread is mapped with a laser interferometer lead error graph.
Shipments include material chemical certificates and heat treatment inspection records.
Thread profile to journal runout is held within 0.005 mm.
Torque measurements are recorded for every assembled nut before final packing.
Customization Options
Journal Machining: Custom turning, keyways, snap ring grooves, and drive threads machined per technical drawings.
Surface Treatments: Black oxide, electro-less nickel, or hard chrome plating for harsh operating environments.
High Temperature Seals: Fluorocarbon seals paired with synthetic lubricants rated up to 150 degrees Celsius.
Custom Nut Geometries: Modified mounting flanges designed for tight structural enclosures.
Complete Actuation Sets: Matched support units, locknuts, and motor brackets supplied as ready-to-install packages.
CAD Drawings & Datasheets
STEP, IGES, and DXF models available for rapid integration into system assemblies.
Production drawings generated within 24 hours based on user specifications.
Dynamic life projections, critical speed calculations, and buckling limits provided upon technical request.
FAQ
Hot Tags: high lead ground ball screws, China high lead ground ball screws manufacturers, suppliers, factory, ball screws for inclined applications, ball screws for railway equipment, ball screws for vertical applications, ball screws with integrated bearings, ball screws with reliable performance, High Load Ground Ball Screws

