DIN 69051 Single Nut Flanged SFU Ball Screws
C5 and C7 Precision Rolled Ground-Thread Ball Screws Engineered for Industrial Automation and CNC Systems
-
Flanged Ball Screw AssemblyAn assembly is not a parts list — it is a tolerance stack. Three mechanical terms add up to about 0.055 mm, and the largest of them owns 83% of the total. Knowing which term that is decides where
-
Flanged Nut Ball ScrewA flange is not a bracket. It is a friction joint that has to pass every newton of thrust through six bolts into the carriage. Get the torque wrong and the joint creeps before the nut's backlash ever
-
Single Nut Ball ScrewIf the nut is preloaded, that preload is fixed by the balls at assembly. When the contact wears, the preload quietly leaves with it, and there is no shim to turn. This page is about what that
-
Cold Rolled Ball ScrewRolling gives you a fast, inexpensive screw with a grain structure a grinding wheel cannot produce. It also removes your ability to correct anything afterwards: once the die has run, the class is
-
SFU1605 Ball ScrewThe 1605 is not simply a smaller 2005. Drop the shaft from Ø20 to Ø16 and two ceilings move in opposite directions: the DN rule lets it turn 25% faster, while the thinner shaft gives up 59% of its
-
Large Lead Ball ScrewOn a long axis, a conventional 5 mm lead screw has to spin very fast to move the carriage quickly. As shaft length grows, rotational speed must drop to stay below critical speed — the point where the
-
2010 BALL SCREWhe 2010 rolled ball screw features a 20 mm shaft with a 10 mm lead, delivering twice the linear travel per revolution compared to the 2005. The designation 2010 means a nominal shaft diameter of 20
-
1605 BALL SCREWThe 1605 ball screw is a core linear transmission component widely used in industrial automation. The designation 1605 means a nominal shaft diameter of 16 mm and a lead of 5 mm per revolution.
-
C7 Ball ScrewsC7 Ball Screws provide accurate linear motion for standard positioning applications and factory automation. Featuring a cumulative lead tolerance of ±0.050 mm per 300 mm travel, these cold-rolled
-
C5 Ball ScrewsC5 Ball Screws provide dynamic linear positioning with a cumulative lead error of ±0.018 mm per 300 mm stroke. The assembly pairs an induction-hardened alloy steel shaft with a precision-ground
-
Preloaded Ball ScrewsPreloaded Ball Screws eliminate axial play by applying a precise internal force between steel balls and raceways. This construction ensures zero-backlash motion and maximum axial rigidity in
-
Flanged Ball ScrewsFlanged Ball Screws feature an integrated DIN 69051 mounting flange on the nut, delivering maximum axial rigidity and simplified mounting for vertical and horizontal motion systems. Built with
Category Overview
SFU Ball Screws feature a DIN 69051 Form B flanged single nut with external tube circulation, designed to convert rotary motion into linear positioning with over 90% mechanical efficiency. Manufactured from induction-hardened SCF55 / GCr15 bearing steel, these assemblies deliver axial rigidity and repeatable positioning accuracy down to ±0.018 mm/300mm. Standardized mounting interfaces allow seamless integration into automated machinery, linear actuators, and precision positioning stages.

Nut Configuration: Single flange nut (DIN 69051 Form B standard) with standard circle bolt hole pattern for direct structural mounting.
Circulation System: External return tube mechanism delivering smooth ball recirculation across heavy axial loads.
Precision Grades:
• C7 Rolled: Cumulative lead error ±0.050 mm / 300 mm.
• C5 Precision Rolled / Ground: Cumulative lead error ±0.018 mm / 300 mm.
End Machining: Standard BK/BF, FK/FF support unit processing or custom machining per client engineering drawings.
Technical Specifications
|
Model Code |
Shaft Dia. (mm) |
Lead (mm) |
Ball Dia. (mm) |
Dynamic Load C (kgf) |
Static Load C0 (kgf) |
Nut Outer Dia. D (mm) |
Flange Dia. D1 (mm) |
|
SFU 1204 |
12 |
4 |
2.381 |
620 |
1,020 |
24 |
40 |
|
SFU 1605 |
16 |
5 |
3.175 |
1,380 |
3,050 |
28 |
48 |
|
SFU 1610 |
16 |
10 |
3.175 |
1,100 |
2,400 |
28 |
48 |
|
SFU 2005 |
20 |
5 |
3.175 |
1,550 |
3,850 |
36 |
58 |
|
SFU 2505 |
25 |
5 |
3.175 |
1,720 |
4,900 |
40 |
62 |
|
SFU 2510 |
25 |
10 |
4.762 |
2,860 |
6,750 |
40 |
62 |
|
SFU 3205 |
32 |
5 |
3.175 |
1,950 |
6,300 |
50 |
80 |
|
SFU 3210 |
32 |
10 |
6.35 |
4,800 |
12,100 |
50 |
80 |
|
SFU 4010 |
40 |
10 |
6.35 |
5,420 |
15,300 |
63 |
93 |
|
SFU 5010 |
50 |
10 |
6.35 |
6,100 |
19,800 |
75 |
110 |
Material Specifications: Shaft: GCr15 / SCF55 (HRC 58–62); Nut: 20CrMo (HRC 58–62); Steel Balls: GCr15 Class 10.
Axial Clearance: Standard zero-backlash configuration or pre-set axial play within 0.02 mm–0.05 mm.
Key Advantages
Standardized DIN Mounting:
Drop-in compatibility with international mounting dimensions simplifies direct replacement and engineering integration.
Induction Hardened Raceways:
Deep surface hardness (HRC 58–62) prevents plastic deformation under static overload conditions.
Low Running Torque:
Precision ground raceway profiles reduce internal friction, enabling lower drive motor sizing requirements.
Contamination Protection:
Integrated dual-lip wiper seals on both nut ends exclude dust and retain lubricant film.
Target Applications
CNC Machine Tools:
Drives X, Y, Z linear positioning axes in milling machines, lathes, and routing platforms.
Industrial Automation:
Powers linear gantry modules, pick-and-place robots, and automated assembly lines.
Laser Cutting & Welding Equipment:
Delivers smooth movement across continuous path contouring systems.
Medical Device Drives:
Controls precision elevation, motorized tables, and diagnostic motion frames.
Calculate Required Load: Determine peak dynamic operating load and static holding force requirements.
Select Diameter and Lead: Match drive speed (RPM) and motor resolution to the required linear pitch.
Determine Precision Grade: Choose C7 for standard transportation axes; select C5 for precision CNC or measurement equipment.
Define End Support Types: Match shaft ends to standard bearing housing series (BK/BF, FK/FF, EK/EF).
Verify Critical Speed: Check maximum operational RPM against the screw shaft length to prevent resonant vibration.

Customization & OEM Services
Custom End Machining: Turning, threading, keyway cutting, and grinding according to customer 2D/3D CAD drawings.
Surface Treatments: Black oxide coating, hard chrome plating, or phosphating for corrosive or cleanroom environments.
Special Lubrication Options: Factory pre-lubrication with high-temperature, low-temperature, or cleanroom-compatible synthetic greases.
Custom Pitch & Lengths: Shaft length cutting up to 6,000 mm with tailored lead pitches upon engineering request.
Manufacturing & Quality Control
Optical Lead Testing:
Laser interferometer calibration verifies cumulative pitch error across the total thread length.
Surface Hardness Verification:
Rockwell hardness testing on every heat-treatment batch ensures uniform depth profiling.
Coordinate Measuring (CMM):
Dimensional inspection of nut mounting holes, flange perpendicularity, and thread profile.
100% Run-out Testing:
Dial indicator radial run-out checks along the full length of every machined screw shaft.
Why Choose Us
Traceable Raw Materials:
Direct sourcing of high-grade alloy bearing steel with full chemical composition heat logs.
01
In-House Thread Rolling & Grinding:
Precision CNC thread grinders maintain pitch consistency across large volume production.
02
Dedicated Assembly Quality Assurance:
Every nut and shaft assembly undergoes torque uniformity testing prior to packaging.
03
Full Manufacturing Transparency:
Direct access to complete technical data, CAD models, and inspection reports for engineering verification.
04
Summary:
Rigorous manufacturing controls and standardized inspection processes deliver long-term positioning accuracy for industrial applications.
05
FAQ

Need Technical Specifications or Custom End Machining for SFU Ball Screws?
Upload your 2D/3D technical drawings (STEP, DWG, PDF) to receive an immediate engineering assessment and quotation.
As one of the leading sfu ball screws manufacturers and suppliers in China, we warmly welcome you to wholesale customized sfu ball screws made in China here from our factory. For quotation, contact us now.
