Face Lock Nuts

Face Lock Nuts
Details:
Face Lock Nuts secure bearings and ball screw support units with zero axial play. Axially positioned locking screws press copper insert pins against shaft threads, holding tight preloads and precision alignment under heavy shock loads without surface marring.
Send Inquiry
Description
Send Inquiry

Face Lock Nuts secure bearings and ball screw support units with zero axial play. Axially positioned locking screws press copper insert pins against shaft threads, holding tight preloads and precision alignment under heavy shock loads without surface marring.

 

Technical Features

 
01/

Front-Access Locking: Hex screws tighten from the front face, enabling installation in narrow housing setups without radial tool access.

02/

Thread Protection: Brass contact pins conform to thread flanks under tension, locking the assembly without scoring precision shafts.

03/

Single-Setup Grinding: Mating surfaces and threads are ground in one operation to hold perpendicularity within 0.002 mm to 0.005 mm.

04/

Repeatable Assembly: Thread engagement remains constant over multiple maintenance disassemblies.

 

Technical Specifications

 

 

Parameter

Value

Reference Standard

Thread Range

M10 × 0.75 – M50 × 1.5

ISO 965 Class 4h

Axial Runout

0.002 mm – 0.005 mm

ISO 230-1

Body Material

42CrMo4 Alloy Steel / S45C

EN 10083 / JIS G4051

Body Hardness

HRC 28 – 32

ISO 6508-1

Pin Material

Brass (C3604)

ASTM B16

Coating

Black Oxide / Manganese Phosphate

ISO 9717

 

Dimensions & Model Selection

 

 

Model

Thread Spec

Outer Diameter (mm)

Thickness (mm)

Locking Screw

Torque (Nm)

Axial Load (kN)

FLN-M10x0.75

M10 × 0.75

24

8

M4 × 3

2.5

18

FLN-M12x1.0

M12 × 1.0

28

10

M4 × 3

2.5

25

FLN-M15x1.0

M15 × 1.0

32

10

M4 × 3

2.5

32

FLN-M20x1.0

M20 × 1.0

38

12

M5 × 3

5.0

48

FLN-M30x1.5

M30 × 1.5

52

14

M6 × 3

8.5

88

FLN-M50x1.5

M50 × 1.5

75

18

M6 × 4

8.5

180

 

Locking Mechanism

 

 

Three or four steel set screws align parallel to the main thread axis. When torqued, these screws push soft brass pins straight into the thread flanks of the mating shaft. The brass yields slightly under pressure, matching the thread profile and creating high frictional friction to lock the nut securely without shifting axial positioning.

 

Materials & Surface Treatments

 

Medium Carbon Steel (S45C):

Heat-treated for standard linear drive assemblies.

Alloy Steel (42CrMo4):

Quenched and tempered for high shock load capabilities.

Stainless Steel (AISI 304):

Corrosion resistance for cleanroom applications.

Black Oxide Finish:

Chemical blackening that preserves original dimensions while offering basic corrosion protection.

Manganese Phosphate:

Porous oil-retaining layer for reduced friction during initial installation.

 

Target Applications

 

 

Machine Tool Spindles: Retains preloads on angular contact bearings under dynamic torque.


Ball Screw Supports: Eliminates axial endplay in automated motion assemblies.


Rotary Index Tables: Holds central shaft alignment under alternating rotary forces.


Compact Drive Housings: Fits tightly enclosed machine frames requiring front tool entry.

 

Customization Options

 
Special Thread Profiles:

Fine metric pitches, left-hand threads, or custom clearances.

Modified Geometry:

Custom outer diameters, spanner wrench drives, or specialized mounting holes.

Alternative Materials:

Stainless steel variants (AISI 316) or high-strength tool steel.

Plating Upgrades:

Electroless nickel plating for chemical exposures.

 

Engineering CAD Support

 

 

STEP, IGES, DXF, and PDF models are maintained for all standard product listings. Digital files import directly into mechanical CAD assemblies to verify tool clearances and housing fit.

 

Selection Checklist

 

 

Calculate Maximum Axial Thrust: Select a nut size where operating dynamic load stays within rated limits.


Review Housing Access: Choose face locking designs when outer diameter access for radial tools is blocked.


Verify Shaft Thread Fit: Check pitch compatibility and ISO thread class limits.


Determine Material Spec: Specify alloy steel for load capacity or stainless steel for corrosive conditions.


Apply Correct Assembly Torque: Tighten both the nut body and front set screws to specified torque limits using calibrated wrenches.

 

FAQ

 

 

Q: How does a face locking nut differ from a radial locking nut?

A: Face lock nuts utilize set screws located on the front face, parallel to the shaft center. Radial lock nuts utilize screws on the outer diameter rim, perpendicular to the shaft. Face lock nuts fit applications where surrounding machinery blocks radial access.

Q: Will tightening the set screws damage the mating shaft threads?

A: No. The internal locking pins are brass, which is softer than steel shafting. The brass pin deforms under pressure against thread flanks, creating locking friction without scoring or thread galling.

Q: Can these lock nuts be removed and re-used?

A: Yes. Because the brass pins protect the mating threads, backed-off screws release tension entirely. The nut can be removed, adjusted, and re-torqued with consistent holding force.

Q: What runout tolerance is maintained on the ground face?

A: Ground face perpendicularity relative to the thread pitch diameter is held within 0.002 mm to 0.005 mm across standard sizes.

Q: Which tools are used during installation?

A: A standard pin spanner socket sets the initial torque on the main nut body. A calibrated hex wrench then tightens the front set screws to the specified torque value.

Hot Tags: face lock nuts, China face lock nuts manufacturers, suppliers, factory, discount lock nut, lock nut distribution, lock nut flange resistance, lock nut outer resistance, rust resistant lock nut, used lock nut

Send Inquiry