Precision Metric Jam Lock Nuts provide rigid axial positioning for ball screws, spindle bearings, and linear drive assemblies. Featuring a low-profile body integrated with a three-point radial brass locking system, these units secure bearing arrangements without scoring shaft threads or altering alignment. Thread accuracy conforms to ISO 4h standards with face runout tolerances held within 0.002 mm to 0.005 mm relative to the bearing reference face.
Key Features
Precision Ground Bearing Face: Maintains perpendicularity within 0.002 mm–0.005 mm to prevent uneven axial loading across bearing races.
3-Point Brass Locking Pins: Copper contact inserts match the thread contour to secure the shaft without thread deformation.
Compact Profile: Reduced thickness allows installation in tight mounting envelopes within machine frames and linear actuators.
High Axial Rigidity: Alloy steel construction supports continuous bidirectional thrust forces in dynamic equipment setups.
Symmetrical Design: Balanced outer spanner slots maintain equilibrium in high-speed rotational setups.
Technical Specifications
|
Parameter |
Standard Specification |
Precision Grade |
|
Thread Range |
M10 × 0.75 – M50 × 1.5 |
Custom pitch available |
|
Thread Class |
ISO 4h / 6H |
ISO 4h Ground |
|
Face Runout |
≤ 0.005 mm |
≤ 0.002 mm |
|
Material Grade |
42CrMo Alloy Steel |
AISI 304 Stainless Steel |
|
Hardness |
HRC 28 – 32 (Body) |
HRC 58 – 62 (Thread Surface) |
|
Locking Method |
Radial 3-Point Brass Pin |
Axial / Angular Pins |
|
Surface Finish |
Black Oxide |
Electroless Nickel |
Dimensions & Model Selection
|
Model Code |
Thread Size |
Outer Dia. (mm) |
Thickness (mm) |
Lock Screw Size |
Max Torque (N·m) |
|
JMN-10×1.0 |
M10 × 1.0 |
18 |
8 |
M4 |
4.5 |
|
JMN-15×1.0 |
M15 × 1.0 |
25 |
8 |
M4 |
5.5 |
|
JMN-20×1.0 |
M20 × 1.0 |
32 |
10 |
M5 |
9.5 |
|
JMN-30×1.5 |
M30 × 1.5 |
45 |
12 |
M6 |
18.0 |
|
JMN-40×1.5 |
M40 × 1.5 |
58 |
14 |
M6 |
20.0 |
|
JMN-50×1.5 |
M50 × 1.5 |
70 |
16 |
M8 |
35.0 |
Locking Mechanism
The locking mechanism utilizes three set screws pressing soft brass inserts against the shaft thread flanks. Spaced at 120-degree intervals, the brass pins deform elastically to fit the thread geometry under load. This multi-point contact generates equal friction across the thread pitch, clamping the nut without applying offset forces or damaging precision-ground shafting.
Materials & Surface Finish
|
Material / Finish |
Properties & Intended Environment |
|
42CrMo Alloy Steel |
High tensile strength for heavy dynamic loads and high axial preloads. |
|
AISI 304 Stainless Steel |
High oxidation resistance for washdown environments and cleanroom machinery. |
|
Black Oxide Finish |
Standard oil-impregnated surface providing indoor corrosion protection. |
|
Electroless Nickel |
Hard uniform layer providing wear resistance and chemical protection. |
Applications of Jam Lock Nuts
Ball Screw Support Units:
Retains angular contact thrust bearings in linear motion drives.
Machine Tool Spindles:
Secures high-precision bearing stacks under high-speed rotational forces.
Laser Cutting Beds:
Maintains position on drive shafts subject to high acceleration rates.
Medical Positioning Systems:
Provides zero-backlash retention in quiet positioning modules.
Rotary Indexing Drives:
Clamps central support shafts where axial space is restricted.
Customization Options
Custom metric or inch thread pitches with right-hand or left-hand threads.
Non-standard outer diameters, modified thicknesses, and altered slot geometries.
Alternative locking pin orientation including 45-degree axial locking configurations.
Tighter perpendicularity tolerances down to 0.0015 mm upon request.
Custom laser marking for part identification and orientation alignment.
Technical Drawings & CAD Models
Download native CAD files directly for mechanical layout design. Drawings include geometric dimensioning, tolerance callouts, spanner slot dimensions, and thread clearance parameters.
3D Models: STEP (.stp), IGES (.igs), SOLIDWORKS (.sldprt)
2D Drawings: DXF, DWG, PDF
How to Select the Right Lock Nut
Verify Thread Profile:
Match thread nominal diameter and pitch to prevent thread binding during installation.
01
Assess Axial Space Limits:
Measure clear shaft length; select low-profile jam nuts when mounting space is restricted.
02
Determine Tolerance Grade:
Select ground precision grades (≤ 0.002 mm) for high-speed spindles and standard grades (≤ 0.005 mm) for standard linear actuators.
03
Confirm Tightening Torque:
Verify required set screw torque to match target axial bearing preload forces.
04
Select Surface Finish:
Choose stainless steel or electroless nickel for humid, outdoor, or cleanroom operating environments.
05
FAQ
Hot Tags: jam lock nuts, China jam lock nuts manufacturers, suppliers, factory, lock nut magnetic isolation, lock nut replacement, lock nut selection, lock nut transportation, lock nut with certificate, source lock nut

