Shaft Lock Nuts

Shaft Lock Nuts
Details:
Precision shaft lock nuts locate bearings, gears, and drive components accurately along rotating shafts, maintaining preload under severe dynamic load and vibration conditions. Engineered with integrated locking brass pins or axial locking screws, these components eliminate keyways, lock washers, or safety wiring, preserving shaft thread integrity while delivering axial runout tolerances within 0.002 mm to 0.005 mm.
Send Inquiry
Description
Send Inquiry

Precision shaft lock nuts locate bearings, gears, and drive components accurately along rotating shafts, maintaining preload under severe dynamic load and vibration conditions. Engineered with integrated locking brass pins or axial locking screws, these components eliminate keyways, lock washers, or safety wiring, preserving shaft thread integrity while delivering axial runout tolerances within 0.002 mm to 0.005 mm.

 

Key Features

 
01/

High-Precision Axial Alignment: Ground thread profiles maintain face perpendicularity within 0.002 mm–0.005 mm to prevent bearing tilt.

02/

Non-Marring Thread Locking: Integrated brass locking pins clamp directly against shaft threads without deforming thread flanks.

03/

Uniform Clamping Force: Balanced set-screw configurations ensure symmetrical weight distribution for high-speed rotational stability.

04/

Reusable Assembly: Precision-machined locking mechanism permits repeated installation and fine adjustments without degrading locking torque.

05/

Keyway Elimination: Removes the need for shaft keyways and lock washers, reducing shaft machining steps and stress points.

 

Technical Specifications

 

 

Specification Parameter

Specification Standard

Thread Type

ISO Metric Fine Thread (M10 × 0.75 to M60 × 2.0)

Thread Precision Grade

ISO 4H / 6H

Thread-to-Face Perpendicularity

≤ 0.002 mm (Precision Class) / ≤ 0.005 mm (Standard Class)

Locking Mechanism Type

Radial 3-Point Brass Pin / Axial Set-Screw / Slot Locking

Operating Temperature Range

-30°C to +120°C

Hardness Level

HRC 28–32 (Nut Body) / HRB 80–90 (Locking Inserts)

Dimensional Compliance

DIN 981 / ISO 2982 Equivalents

 

Dimensions & Model Selection

 

 

Model Code

Thread Spec

Outer Diameter (mm)

Total Width (mm)

Tightening Torque (Nm)

Axial Load Capacity (kN)

SLN-M10x0.75

M10 × 0.75

18

8

4.5

18.5

SLN-M12x1.0

M12 × 1.00

22

8

5.0

24.0

SLN-M15x1.0

M15 × 1.00

25

8

5.5

31.0

SLN-M20x1.0

M20 × 1.00

32

10

8.0

48.0

SLN-M25x1.5

M25 × 1.50

38

12

9.5

67.0

SLN-M30x1.5

M30 × 1.50

45

12

14.0

88.0

SLN-M40x1.5

M40 × 1.50

58

14

16.0

132.0

SLN-M50x1.5

M50 × 1.50

70

14

18.0

175.0

 

Locking Mechanism

 

 

Radial 3-Point Locking: Employs three brass pins spaced at 120-degree intervals. Tightening the set-screws forces the brass inserts into contact with shaft threads, securing the nut without thread damage.


Axial Locking: Uses clamping screws parallel to the shaft center axis to pull split threads into locking engagement, suited for tight radial spaces.


Slot Type Locking: Features an offset slot structure where tightening a single locking screw collapses the thread gap, generating high friction across contact surfaces.

 

Materials & Surface Treatment

 

Medium Carbon Alloy Steel (42CrMo / S45C):

Heat treated to HRC 28–32 for high structural rigidity and resistance to thread deformation.

Stainless Steel (AISI 304 / 316):

Passivated finish for corrosion resistance in cleanroom automation and processing machinery.

Black Oxide Coating:

Standard chemical conversion surface providing basic corrosion protection and dry lubricant retention.

Manganese Phosphating:

Low-friction chemical coating for applications requiring increased anti-galling performance during assembly.

 

Applications of Shaft Lock Nuts

 

 

Machine Tool Spindles: Retains high-precision angular contact bearings while controlling axial runout under high rotational speeds.


Ball Screw Support Units: Preloads thrust bearings on fixed-end ball screw mounts in automated linear motion assemblies.


Servo Drive Units: Maintains dynamic rotational balance and accurate axial positioning under high-acceleration cycles.


Precision Rotary Tables: Maintains correct bearing preload to support rotational rigidity and indexing accuracy.

 

Customization Options

 

 

Non-standard thread pitches, left-hand threads, and custom thread tolerances (ISO 4H, 5H).
Modified outer diameters, spanner wrench slots, and custom overall lengths.
Alternative materials including high-nickel alloys and aluminum bronze.
Custom surface plating options including electroless nickel and zinc-nickel finish.

 

2D / 3D CAD & Technical Drawings

 

Available Formats:

STEP, IGES, Parasolid, DXF, DWG.

Configurator Access:

Direct download of dimensioned 3D models configured with exact thread size, outer diameter, and locking type.

Quality Documentation:

Inspection certificates, material test reports, and dimensional inspection sheets supplied upon request.

 

How to Select the Right Lock Nut

 

 

Determine Required Axial Load: Check dynamic shock loads and static bearing preload against the rated load capacity table.


Verify Space Constraints: Select radial set-screw locking for standard housings, or axial locking where radial access for tightening tools is limited.


Check Rotational Speed: Choose precision-ground nuts with runout ≤ 0.002 mm for high-speed shaft applications to prevent dynamic imbalance.


Select Material Finish: Specify alloy steel with black oxide for standard industrial machinery, or stainless steel for corrosive environments.

 

FAQ

 

 

Q: How does a precision lock nut prevent shaft thread damage during tightening?

A: The locking set-screws press soft brass pins directly against the shaft thread flanks. The brass conforms to the thread angle, providing secure friction locking without cutting or deforming the steel shaft threads.

Q: Can these lock nuts be reused after disassembly?

A: Yes. Because the brass locking pins conform to the shaft thread geometry without cutting into the metal, the assembly can be loosened, repositioned, and re-torqued while maintaining locking force.

Q: What runout tolerance is necessary for high-speed machine tool spindles?

A: High-speed shafts require thread-to-face perpendicularity runout within ≤ 0.002 mm. Runout outside this tolerance introduces angular misalignment in bearing races, leading to vibration and heat generation.

Q: What is the difference between radial and axial locking mechanisms?

A: Radial locking uses set-screws around the outer perimeter, requiring clearance around the nut OD. Axial locking places screws on the front face parallel to the shaft, designed for housings where radial access is obstructed.

Q: What inspection reports are provided for quality verification?

A: Available documentation includes Material Test Certificates (EN 10204 3.1), full dimensional inspection reports, heat treatment records, and runout inspection sheets.

Hot Tags: shaft lock nuts, China shaft lock nuts manufacturers, suppliers, factory, lock nut dimensions, lock nut exhibition, lock nut screw thread resistance, lock nut shoulder resistance, lock nut technical support, promotional lock nut

Send Inquiry