Thin Lock Nuts are precision axial locking fasteners designed for assemblies with limited axial space. These components integrate radial brass pins to secure shaft threads without altering pitch geometry or inducing spindle runout. Ground bearing surfaces ensure perpendicular seating against bearing rings under dynamic dynamic loads.
Key Features
Reduced Axial Thickness: Engineered for short thread engagement lengths and compact bearing housings.
Thread-Safe Clamping: Radial brass pins deform elastically against shaft threads, eliminating flank damage and thread galling.
Precision Face Runout: Ground contact faces maintain axial perpendicularity within 0.002 mm to 0.005 mm.
Balanced Three-Point Locking: Equidistant pin distribution equalizes radial force around the shaft circumference.
Multi-Cycle Reusability: Non-destructive locking design permits repeated maintenance and re-alignment cycles.
Technical Specifications
|
Parameter |
Specification |
|
Thread Tolerance |
ISO 965 4H / 6H Fine Pitch |
|
Size Range |
M10 × 0.75 to M50 × 1.5 |
|
Perpendicularity |
≤ 0.002 mm |
|
Body Material |
42CrMo Alloy Steel |
|
Hardness |
HRC 28 - 32 |
|
Locking Pin Material |
Brass CuZn39 |
|
Surface Finish |
Manganese Phosphate |
|
Operating Temp |
-30°C to +140°C |
Dimensions & Model Selection
|
Model |
Thread Size |
Outer Dia (mm) |
Thickness (mm) |
Locking Screw |
Tightening Torque (Nm) |
Weight (kg) |
|
TLN-M10x0.75 |
M10 × 0.75 |
18 |
4.5 |
M4 × 3 |
1.5 |
0.008 |
|
TLN-M12x1.0 |
M12 × 1.0 |
22 |
5.0 |
M4 × 3 |
2.0 |
0.012 |
|
TLN-M15x1.0 |
M15 × 1.0 |
25 |
5.0 |
M4 × 3 |
2.5 |
0.016 |
|
TLN-M20x1.0 |
M20 × 1.0 |
32 |
6.0 |
M5 × 3 |
4.5 |
0.028 |
|
TLN-M25x1.5 |
M25 × 1.5 |
38 |
7.0 |
M5 × 3 |
5.0 |
0.045 |
|
TLN-M30x1.5 |
M30 × 1.5 |
45 |
7.0 |
M6 × 3 |
8.0 |
0.062 |
|
TLN-M40x1.5 |
M40 × 1.5 |
58 |
8.0 |
M6 × 3 |
9.5 |
0.110 |
|
TLN-M50x1.5 |
M50 × 1.5 |
70 |
9.0 |
M6 × 3 |
10.0 |
0.180 |
Locking Mechanism
The locking mechanism operates via three radial set screws acting directly on brass insert pins. Each pin contact face is machined to match the internal thread profile. When set screws are torqued, the brass pins engage the shaft thread flanks along the pitch line. This radial engagement prevents axial displacement without disturbing face runout or causing thread deformation.
Materials & Surface Treatment
Heat-treated 42CrMo steel provides yield strength under continuous axial clamping tension.
Applied for wear resistance and oil-retention lubricity during thread engagement.
Optional surface plating available for moisture exposure or specialized clean environments.
Applications of Thin Lock Nuts
Ball Screw Support Units: Secures end bearings on short shaft journals.
Machine Tool Spindles: Retains angular contact bearings with minimal rotational unbalance.
Servo Actuator Shafts: Compact axial locking in high-density automation drive trains.
Gear Reducer Assemblies: Maintains shaft position within narrow housing clearances.
Customization Options
Custom Thread Profiles:
Non-standard fine pitch, left-hand threads, or custom pitch diameters.
Alternative Materials:
Stainless steel alloys or lightweight high-tensile materials.
Custom Dimensions:
Modified thickness, outer diameter slots, or pin drive arrangements.
Technical CAD Drawings
Digital model geometry files are accessible for direct design integration:
Formats Available: STEP, IGES, DWG, DXF.
Model Integrity: Exact thread profiles, clearance boundaries, and pin access locations matching physical specifications.
How to Select the Right Lock Nut
Match Thread Dimensions:
Identify exact shaft thread pitch and nominal diameter.
Verify Envelope Clearance:
Confirm axial thickness limit and radial slot clearance.
Calculate Required Preload:
Check recommended lock nut tightening torque against required bearing preload forces.
Determine Surface Finish:
Select standard phosphate or nickel plating based on environmental operating conditions.
FAQ
Hot Tags: thin lock nuts, China thin lock nuts manufacturers, suppliers, factory, lock nut boss resistance, lock nut compression resistance, lock nut inner resistance, lock nut magnetic isolation, lock nut marketing, lock nut top resistance

