Features
Compact and lightweight
Compact and lightweight, like the MGN5 series, the size is very small and can be adapted to small equipment with limited space.
Variety of materials
Stainless steel and alloy steel are available. Stainless steel components include sliders, guide rails and other metal fittings, which are rust-resistant.
Advanced contact design
Gothic four-point contact design, can withstand loads from up, down, left, right and other directions, strong rigidity and high precision.
Interchangeability
With steel ball keeper design, the slider and other parts are interchangeable within the range of accuracy allowed, convenient for maintenance and replacement.
Product Information
Designed specifically for small precision transmission scenarios, the Mini Linear Guide solves the pain points of large volume, poor adaptability and insufficient precision of ordinary linear guides. Adopting integral precision grinding technology, the Mini Linear Guide has a compact structure and small size, 25% lighter than ordinary micro guides, which can adapt to narrow installation spaces. It also has excellent rigidity and stability, and after surface hardening and anti-rust treatment, it is wear-resistant and corrosion-resistant, and not easy to have precision attenuation.

Compared with ordinary micro guides, the Mini Linear Guide optimizes the ball circulation structure, with built-in precision micro balls, small transmission resistance, smooth operation, no jamming or jitter, small torque fluctuation during low-speed operation, which can accurately control linear displacement and ensure high-precision operation of equipment. The fit gap between the guide rail and the slider is controlled at 0.002-0.005mm, with precise positioning, and it supports two-way dustproof sealing design, with a protection level of IP64, which can effectively block the intrusion of dust and impurities, adapting to the precision transmission needs of small equipment. In addition, the Mini Linear Guide is easy to install, with reserved standard mounting holes, which can be directly assembled without complex debugging, and its service life is 40% longer than that of ordinary micro guides.

When ordering, provide the guide width, stroke and matching equipment parameters of the Mini Linear Guide to ensure accurate adaptation to the equipment. Handle with care during installation, do a good job in positioning and calibration, and avoid guide deformation caused by violent operation. Regularly clean the surface of the guide rail in daily use, do a good job in lubrication and maintenance, prevent impurity accumulation, and maintain its guidance accuracy and service life.
|
Product Name |
MGNmini linear guide |
|
Material |
Bearing steel, stainless steel |
|
Series |
MGN series |
|
Product Characteristics |
Smooth, high wear-resistant, high precision, low noise, load-resistant, interchangeable with Shangyin. |
|
Length |
Length can be customised according to customers' requirements. |
|
Packaging |
1. Plastic bag with box or wooden case. 2. According to customer's request. |
|
Shipping |
By sea/air/express service. |
Specification Parameters

|
Type |
Combination size (mm) | Slide size (mm) | Guide rail size (mm) | Dimensions of fixing screws for guide rails | Basic dynamic rated load | Basic static rated load | Allowable static torque | Weight | ||||||||||||||||||||
|
MR |
MP |
MY |
Sliding block KG | Guide rail KG/M | ||||||||||||||||||||||||
|
H |
H1 |
N |
W |
B |
B1 |
C |
L1 |
L |
L |
GN |
Mxl |
H₂ |
WR |
HR |
D |
h |
d |
P |
E |
(mm) |
C (kN) |
Co (KN) |
||||||
|
MGN 7C |
8 |
15 |
5 |
17 |
12 |
2.5 |
8 |
13.5 |
1.2 |
M2x2.5 |
1.5 |
7 |
4.8 |
42 |
2.3 |
2.4 |
15 |
5 |
M2x6 |
0.98 |
1.24 |
4.7 |
2.84 |
2.84 |
0.01 |
0.22 |
||
|
MGN 7H |
13.00 |
21.80 |
1.37 |
1.96 |
7.64 |
4.8 |
4.8 |
0.015 |
||||||||||||||||||||
|
MGN 9C |
10 |
2 |
5.5 |
20 |
15 |
2.5 |
10 |
18.9 |
28.9 |
1.4 |
M3x3 |
1.8 |
9 |
6.5 |
6 |
3.5 |
3.5 |
20 |
7.5 |
M3x8 |
1.86 |
2.55 |
11.76 |
7.35 |
7.35 |
0.016 |
0.38 |
|
|
MGN 9H |
16 |
29.9 |
39.9 |
2.55 |
4.02 |
19.6 |
18.62 |
18.62 |
0.026 |
|||||||||||||||||||
|
MGN 12C |
13 |
3 |
7.5 |
27 |
20 |
3.5 |
15 |
21.7 |
34.7 |
2 |
M3x3.5 |
2.5 |
12 |
8 |
6 |
4.5 |
35 |
25 |
10 |
M3x8 |
2.84 |
3.92 |
25.48 |
13.72 |
13.72 |
0.034 |
0.65 |
|
|
MGN 12H |
20 |
32.4 |
45.4 |
3.72 |
5.88 |
38.22 |
36.26 |
36.26 |
0.054 |
|||||||||||||||||||
|
MGN 15C |
16 |
4 |
8.5 |
32 |
25 |
3.5 |
20 |
26.7 |
42.1 |
4.5 |
M3 |
M3x4 |
3 |
15 |
10 |
6 |
4.5 |
3.5 |
40 |
15 |
M3x10 |
4.61 |
5.59 |
45.08 |
21.56 |
21.56 |
0.059 |
1.06 |
|
MGN 15H |
25 |
43.4 |
58.8 |
6.37 |
9.11 |
73.5 |
57.82 |
57.82 |
0.092 |
|||||||||||||||||||

| Type | Combination size (mm) | Slide size (mm) | Guide rail size (mm) | Dimensions of fixing screws for guide rails | Basic dynamic rated load | Basic static rated load | Allowable static torque | Weight | ||||||||||||||||||||
|
MR |
MP |
MY |
Sliding block KG | Guide rail KG/M | ||||||||||||||||||||||||
|
H |
H1 |
N |
W |
B |
B1 |
C |
L1 |
L |
L |
GN |
Mxl |
H₂ |
WR |
HR |
D |
h |
d |
P |
E |
(mm) |
C (kN) |
Co (KN) |
||||||
|
MGN 7C |
8 |
15 |
5 |
17 |
12 |
2.5 |
8 |
13.5 |
1.2 |
M2x2.5 |
1.5 |
7 |
4.8 |
42 |
2.3 |
2.4 |
15 |
5 |
M2x6 |
0.98 |
1.24 |
4.7 |
2.84 |
2.84 |
0.01 |
0.22 |
||
|
MGN 7H |
13.00 |
21.80 |
1.37 |
1.96 |
7.64 |
4.8 |
4.8 |
0.015 |
||||||||||||||||||||
|
MGN 9C |
10 |
2 |
5.5 |
20 |
15 |
2.5 |
10 |
18.9 |
28.9 |
1.4 |
M3x3 |
1.8 |
9 |
6.5 |
6 |
3.5 |
3.5 |
20 |
7.5 |
M3x8 |
1.86 |
2.55 |
11.76 |
7.35 |
7.35 |
0.016 |
0.38 |
|
|
MGN 9H |
16 |
29.9 |
39.9 |
2.55 |
4.02 |
19.6 |
18.62 |
18.62 |
0.026 |
|||||||||||||||||||
|
MGN 12C |
13 |
3 |
7.5 |
27 |
20 |
3.5 |
15 |
21.7 |
34.7 |
2 |
M3x3.5 |
2.5 |
12 |
8 |
6 |
4.5 |
35 |
25 |
10 |
M3x8 |
2.84 |
3.92 |
25.48 |
13.72 |
13.72 |
0.034 |
0.65 |
|
|
MGN 12H |
20 |
32.4 |
45.4 |
3.72 |
5.88 |
38.22 |
36.26 |
36.26 |
0.054 |
|||||||||||||||||||
|
MGN 15C |
16 |
4 |
8.5 |
32 |
25 |
3.5 |
20 |
26.7 |
42.1 |
4.5 |
M3 |
M3x4 |
3 |
15 |
10 |
6 |
4.5 |
3.5 |
40 |
15 |
M3x10 |
4.61 |
5.59 |
45.08 |
21.56 |
21.56 |
0.059 |
1.06 |
|
MGN 15H |
25 |
43.4 |
58.8 |
6.37 |
9.11 |
73.5 |
57.82 |
57.82 |
0.092 |
|||||||||||||||||||
Product Display




Scenario Application

Mini Linear Guide Applications
Mini Linear Guide: Compact size, high precision, designed for tight spaces and precise transmission.
Semiconductor Manufacturing
Used for wafer dicing equipment stage guidance and joint transmission in chip packaging robotic arms, ensuring micron-level positioning accuracy to safeguard chip processing yield rates.
Electronic Component Assembly
Adapted to the nozzle module sliding mechanism of SMT placement machines, enabling high-speed, precise placement of miniature components like resistors and capacitors with positioning errors under ±0.02mm.
Medical Diagnostic Equipment
Employed in sample rack conveyance tracks for biochemical analyzers and probe movement assemblies for ultrasound diagnostic devices, guaranteeing smooth operation and data accuracy during testing.
Precision Measuring Instruments
Serving as guide components for coordinate measuring machine probe movement axes and laser profilometer scanning frames, enabling micron-level dimensional inspection of precision workpieces.
Compact Automation Equipment
Adapted for claw sliding structures in desktop sorting robots and guide rails for micro-conveyor belts, meeting efficient transmission demands in confined spaces.
Consumer Electronics Components
Used in camera lift mechanisms for high-end smartphones and sliding adjustments for fingerprint recognition modules in smart door locks, balancing compact design with smooth operation.
Transportation and Packaging

Multi-layer protective packaging tailored to diverse requirements
Standard-sized rails feature dual-layer protection with "pearl cotton + cardboard box"; sliders are covered with rust-proof film, and accessories are sealed in packaging. Bulk/oversized rails (exceeding 1.5 meters) are secured on custom wooden pallets with foam dividers and waterproof film, bearing multilingual warning labels. Guides for dust-free/corrosion-resistant environments receive additional vacuum packaging to isolate moisture and dust, ensuring undamaged, ready-to-use delivery overseas.
Flexible shipping solutions balance efficiency and customization
Overseas orders typically utilize sea freight via our international logistics network, balancing cost and security with full tracking. Urgent needs can coordinate international air freight with transit times confirmed by destination. Custom services include: - Designated carriers - Door-to-door delivery and unloading - Import/export customs clearance - Overseas warehousing Our sales team provides end-to-end coordination to ensure seamless transportation.

Mini Linear Guide After-Sales Service
- Products come with an industry-standard warranty period. During this period, any quality issues such as precision deviations or slider jamming not caused by human error will be repaired or replaced free of charge. Paid repairs are available beyond the warranty period.
- After-sales issues receive preliminary solutions within 24 hours to minimize equipment downtime.
- Customized solutions are available for equipment operating in high-dust, highly corrosive, or other special environments, as well as for urgent repairs or requests for specific brand parts.
- Regular follow-ups are conducted after product deployment to understand operational status, usage patterns, and requirements, with service and product optimization based on feedback.
Other special after-sales needs can be discussed and negotiated at any time.
FAQ
Hot Tags: mini linear guide, China mini linear guide manufacturers, suppliers, factory, linear guide offer, linear guide prototype, linear guide specimen, linear guide manufacturer, purchase linear guide, linear guide showcase
