R-Type Lock Nuts provide high-accuracy axial positioning for bearings and dynamic shaft components. Built with three radial brass locking shoes, these units clamp securely onto male threads without deforming pitch geometry. The precision-ground reference face delivers thread-to-face runout down to 0.002 mm, keeping assembly alignments rigid under reversing loads and dynamic vibration.
Key Features
Radial 120-Degree Locking System
Three internally housed brass pins contact shaft threads at exact 120-degree intervals, locking the nut securely without thread distortion.
Sub-Micron Face Perpendicularity
Precision-ground contacting faces reduce runout errors to 0.002 mm, preventing localized overload on spindle and ballscrew bearings.
Non-Destructive Thread Contact
Soft brass shoes deform slightly to match thread profiles, permitting repeated installation and precise backlash adjustments.
Low Radial Clearance Access
Locking set screws drive from the outer circumference, enabling installation inside tight machine housings where front-face tool access is impossible.
Stable Preload Retention
Direct surface friction holds positioning accurate under high rotational speeds, rapid accelerations, and heavy axial impacts.
Technical Specifications
|
Parameter |
Standard Grade |
High-Precision Grade |
|
Thread Size |
M6x0.5 - M200x3.0 |
M10x1.0 - M150x2.0 |
|
Thread Tolerance |
ISO 4H / 6H |
ISO 4H / 3g |
|
Face Runout |
≤ 0.005 mm |
≤ 0.002 mm |
|
Main Material |
42CrMo Alloy Steel |
42CrMo Alloy Steel |
|
Surface Hardness |
HRC 28-32 |
HRC 28-32 |
|
Locking Shoe Material |
High-Tensile Brass C3604 |
High-Tensile Brass C3604 |
|
Screw Grade |
Class 12.9 High Tensile |
Class 12.9 High Tensile |
|
Coating |
Black Oxide / Phosphate |
Phosphate / Nickel Plating |
Dimensions & Model Selection
|
Model |
Thread Size (d) |
Pitch (p) |
Outer Diameter (D) |
Thickness (h) |
Locking Screw |
Tightening Torque (Nm) |
Weight (kg) |
|
R-M10x1.0 |
M10 |
1.0 mm |
18 mm |
8 mm |
M4 |
1.5 |
0.012 |
|
R-M12x1.0 |
M12 |
1.0 mm |
22 mm |
8 mm |
M4 |
1.5 |
0.018 |
|
R-M15x1.0 |
M15 |
1.0 mm |
25 mm |
10 mm |
M5 |
3.0 |
0.028 |
|
R-M20x1.5 |
M20 |
1.5 mm |
32 mm |
12 mm |
M5 |
3.0 |
0.052 |
|
R-M25x1.5 |
M25 |
1.5 mm |
38 mm |
12 mm |
M6 |
5.0 |
0.075 |
|
R-M30x1.5 |
M30 |
1.5 mm |
45 mm |
14 mm |
M6 |
5.0 |
0.115 |
|
R-M40x1.5 |
M40 |
1.5 mm |
58 mm |
16 mm |
M8 |
12.0 |
0.210 |
|
R-M50x1.5 |
M50 |
1.5 mm |
70 mm |
18 mm |
M8 |
12.0 |
0.340 |
|
R-M60x2.0 |
M60 |
2.0 mm |
85 mm |
20 mm |
M10 |
25.0 |
0.580 |
Locking Mechanism
The assembly locks purely through circumferential clamping force:
Tightening the set screws forces internal brass shoes inward along radial paths.
The inner contour of each brass shoe matches the male thread pitch and flank angle.
High static friction locks the nut in position without introducing axial displacement or tilting moments.
The main thread accepts full clamping force without surface scarring or pitch damage.
Materials & Surface Treatment
Quenched and tempered to HRC 28-32, delivering fatigue resistance and structural stability under dynamic load cycles.
Ductile pin composition yields under clamping pressure to match male threads, preventing galling on ground shafts.
Micro-porous surface coating holds lubrication, offering corrosion protection and low wear in humid environments.
Uniform 12-micron coating thickness applied for cleanroom, chemical, or washdown applications.
Applications of R-Type Lock Nutsof Radial Lock Nuts
CNC Spindle Units
Preloads angular contact bearings while maintaining dynamic rotational balance at speeds above 10,000 RPM.
Ball Screw Fixed Supports
Locks support bearings on linear drive systems to keep positioning repeatable during rapid directional shifts.
Compact Servo Gearboxes
Secures dynamic shaft assemblies where limited radial access prevents front-face tool insertion.
Multi-Axis Indexing Tables
Provides micro-adjustable preloads to eliminate axial play in high-precision rotary joints.
Customization Options
Non-standard pitch threads, left-hand threads, and fine pitch modifications.
Precision grinding for custom face runout requirements below 0.0015 mm.
Stainless steel body construction for corrosive or medical production setups.
Specialized protective surface coatings including zinc-nickel and hard anodizing.
2D / 3D CAD DATA
Available Formats: STEP, IGES, DXF, DWG, PDF
File Access: Select the required model code from the table above and submit a request. Native 3D geometry models are delivered within 24 hours to integrate directly into mechanical design CAD projects.
How to Select the Right Lock Nut
Verify Thread Diameter and Pitch
Measure screw external thread dimensions to select matching internal threads.
Check Access Space
Choose R-Type Lock Nuts when front-face access is obstructed by housings. Use radial entry points for tool clearance.
Determine Runout Tolerance
Select High-Precision Grade (≤ 0.002 mm) for high-speed spindles. Select Standard Grade (≤ 0.005 mm) for general positioning axes.
Confirm Assembly Torque
Apply specified set screw torques from the dimensions table to reach target locking friction without over-stressing fasteners.
FAQ
Hot Tags: r-type lock nuts, China r-type lock nuts manufacturers, suppliers, factory, lock nut feedback, lock nut loosening, lock nut packaging, lock nut screw thread resistance, lock nut slot resistance, used lock nut

