F-Type Precision Lock Nuts incorporate three radially arranged brass pins angled at 30° to grip shaft threads. This locking geometry secures components without deforming thread flanks or compromising shaft balance. Manufactured with ground reference faces and precision-cut threads, these components maintain runout tolerances under 0.002 mm for spindle drives, ball screw support units, and high-speed positioning systems.
Key Features
30° Radial Pin Engagement: Directs locking force along the thread pitch line, preventing thread damage and axial shaft shifting during torque application.
Ground Reference Faces: Single-setup grinding produces perpendicularity tolerances between 0.002 mm and 0.005 mm for accurate bearing seating.
Non-Marring Thread Contact: Brass locking inserts conform to thread profiles, permitting multiple installation cycles without shaft deformation.
Rotational Symmetry: Balanced profile prevents vibration in dynamic high-RPM applications.
Technical Specifications
|
Property |
Value / Standard |
|
Thread Size Range |
M6 x 0.5 to M200 x 3.0 |
|
Thread Precision |
ISO 4H / ISO 6H |
|
Perpendicularity Tolerance |
≤ 0.002 mm (Size ≤ M50); ≤ 0.005 mm (Size > M50) |
|
Base Material |
42CrMo Alloy Steel / S45C Carbon Steel |
|
Hardness Level |
HRC 28 – 32 |
|
Locking Pin Material |
CuZn39Pb3 Brass |
|
Surface Finish |
Black Oxide / Manganese Phosphate / Nickel Plated |
|
Operating Temperature |
-30°C to +120°C |
Dimensions & Model Selection
|
Model |
Thread (d1) |
Pitch (mm) |
Outer Dia (D) mm |
Thickness (B) mm |
Set Screw (m) |
Tightening Torque (Nm) |
|
F-M10x1.0 |
M10 |
1.0 |
18 |
8 |
3 x M4 |
1.5 |
|
F-M12x1.0 |
M12 |
1.0 |
22 |
8 |
3 x M4 |
1.5 |
|
F-M15x1.0 |
M15 |
1.0 |
25 |
10 |
3 x M4 |
1.5 |
|
F-M20x1.5 |
M20 |
1.5 |
32 |
10 |
3 x M5 |
3.0 |
|
F-M25x1.5 |
M25 |
1.5 |
38 |
12 |
3 x M5 |
3.0 |
|
F-M30x1.5 |
M30 |
1.5 |
45 |
12 |
3 x M6 |
5.0 |
|
F-M40x1.5 |
M40 |
1.5 |
58 |
14 |
3 x M6 |
5.0 |
|
F-M50x1.5 |
M50 |
1.5 |
70 |
16 |
3 x M6 |
5.0 |
Locking Mechanism
The locking mechanism uses three brass pins positioned at 30° angles relative to the reference face. Tightening the set screws forces the brass pins against the thread flanks of the shaft. Matching the pin angle to the thread pitch distributes clamping force uniformly, maintaining precise axial alignment without shifting preloaded bearings.
Materials & Surface Treatment
Heat-treated alloy steel maintains structural integrity under sustained axial loads.
Machined brass inserts absorb set-screw force, conforming to shaft threads without causing micro-galling or wear.
Standard black oxide finish retains rust-inhibiting oils. Optional nickel plating provides corrosion resistance for damp or regulated environments.
Applications of F-Type Lock Nuts
Spindle Assemblies: Retains spindle bearings while maintaining axial runout limits under thermal expansion.
Ball Screw Supports: Secures angular contact bearings on fixed support blocks.
Rotary Tables: Clamps central axes in indexing units to prevent angular misalignment.
Direct-Drive Motors: Retains rotor structures on hollow shafts subjected to frequent direction reversals.
Customization Options
• Left-hand threads, coarse threads, or unified inch threads.
• Custom outer diameters, thickness modifications, or specialized drive slots.
• Stainless steel (AISI 304 / 316) for corrosive environments.
• Zinc-nickel alloy or phosphate coatings.
2D / 3D CAD Downloads
Download 2D drawings (DWG/DXF) and 3D models (STEP/IGES) directly for CAD integration and interference checking.
Selection Guide
Calculate required axial load capacity to determine thread diameter.
Verify housing clearance against outer diameter and total width parameters.
Confirm perpendicularity tolerances match the system operating speed.
Select surface treatment based on ambient humidity and lubricant exposure.
FAQ
Hot Tags: f-type lock nuts, China f-type lock nuts manufacturers, suppliers, factory, lock nut bolt thread resistance, lock nut lubrication, lock nut radial resistance, lock nut review, lock nut shockproofing, lock nut transverse resistance

