Material Of Shaft Support Block

Mar 14, 2025

Leave a message

Shaft support block material selection: performance and cost balance strategy

 

I. Material Performance and Cost Core Parameters

Metal Materials

Cast iron (HT300): compressive strength 200MPa, good shock absorption, low casting cost, suitable for static loads.

45# steel: yield strength 355MPa, hardness after quenching HRC40-45, suitable for heavy load scenarios, medium cost.

6061-T6 aluminum alloy: density 2.7g/cm³, tensile strength 310MPa, better corrosion resistance, cost 25% lower than steel.

316 stainless steel: chlorine ion corrosion resistance, cost 15% higher than 304, suitable for wet environment.

Non-metallic materials

POM plastic: coefficient of friction 0.1-0.3, temperature resistance ≤100℃, low cost, suitable for light loads.

Al₂O₃ ceramics: melting point 2050 ℃, hardness HRA85, high cost, suitable for high-temperature precision scenes.

 

Supported Linear Rail Shaft

 

Second, cost control technology path

material substitution

Ductile cast iron (QT600) instead of 35CrMo steel, tensile strength retained 90%, cost down 15%.

PA66+30% glass fiber replaces aluminum alloy, cost reduced by 50%, suitable for load <200N scenes.

 

Structural optimization

Aluminum alloy support block adopts skeleton structure, weight reduced by 60%, cost reduced by 45%, finite element verification of strength is required.

Steel-plastic splicing structure, steel for core load-bearing area and POM for non-load-bearing area, cost reduced by 35%.

 

Surface treatments

Laser hardened alternative to monolithic high carbon steel, 15% cost increase, 3x higher wear resistance.

The cost of blackening treatment increases by 5%, which is suitable for the anti-corrosion requirements of general machine tools.

 

Third, bulk purchasing and supply chain optimization

Purchasing volume on the cost of

cast iron parts mold cost accounted for 30%, the order quantity from 100 pieces to 500 pieces, the unit price from 80 yuan to 45 yuan, a decrease of 43.75%.

Signing annual agreements with suppliers and locking prices through long-term procurement can reduce procurement costs by 10%-15%.

 

Localized Supply Chain Layout

Choosing material suppliers within 200 kilometers of the production base reduces transportation costs by 20%-30% and shortens the delivery period.

Jointly with other enterprises for centralized purchasing, sharing logistics resources, each piece of support block cost sharing reduced by 5-8 yuan.

 

Fourth, the combination of standardization and customization strategy

Priority use of standard parts

Priority use of HGR standard rail support block, unit price of $ 50, 60% lower than the cost of customized parts, suitable for 90% of the conventional automated production line needs.

Establish standard parts library to reduce design and development costs, single design can be reused, saving design costs 3000-5000 yuan / project.

 

Customization cost control

When customization is necessary, modular design is adopted, with more than 70% of common parts, and the customized part is only for special requirements, reducing customization cost by 40%.

Use parametric design software to quickly generate different specification models, shorten the design cycle from 7 days to 2 days, and reduce the labor cost by 60%.

 

Five, selection decision-making process

to determine the load (such as > 1000N selection of steel / cast iron), precision (± 0.01mm selection of ceramic / cast iron), the environment (corrosion selection of 316).

List 2-3 candidate materials and compare the initial cost difference.

Calculate 5-year maintenance and failure risk costs.

Select the lowest LCC option, allowing for high initial cost but low total cost.

 

Linear Rail Shaft Support

 

Contact Us

📞Tel: +86-8613116375959 (24 hours technical consultation)

📧Email: 741097243@qq.com

🌐Official website: https://www.automation-js.com/

Send Inquiry